Fence Installation in Park Ridge, NJ
Park Ridge draws its fence line at the front yard. Under § 101-21E(1), "no fence or wall shall be erected, altered or constructed in any residential zone which shall exceed six feet in height above ground level, except that no fence exceeding four feet in height shall be permitted in the front yard" — and every fence goes in with "the finished side of a fence… fac[ing] the adjoining properties" (§ 101-21E(6)). Corner lots carry two separate sight rules, and pools sit deep in the lot: Park Ridge pushes a pool's inner face at least 20 feet from every property line (§ 101-21D(3)), inside a fence the pool chapter sets at four feet or higher with openings no larger than four inches(Ch. 88, § 88-8).
Solanos Fence installs vinyl, aluminum, WPC composite, wood and chain link fencing in Park Ridge, NJ, and handles fence repair as well. We also sell fence materials for pickup at our Fairfield location. Park Ridge is part of our Bergen County service area.
Park Ridge's Fence Rules: § 101-21E
Park Ridge regulates fences in § 101-21E of its zoning chapter (Chapter 101), pools in Chapter 88, corner sight distance in Chapter 82 and § 101-15, and fees in Chapter 101, Article XII and Chapter 50. The main rules:
- Six feet in a residential zone, four feet in the front yard (§ 101-21E(1))."No fence or wall shall be erected, altered or constructed in any residential zone which shall exceed six feet in height above ground level, except that no fence exceeding four feet in height shall be permitted in the front yard." The section sets no openness rule — the front-yard limit is height only.
- Nonresidential fences (§ 101-21E(2)). Fences and walls in nonresidential zones cap at eight feet above ground level.
- Finished side out (§ 101-21E(6))."The finished side of a fence shall face the adjoining properties."
- Corner lots: a front yard on each street (§ 101-15C). A corner lot has "a required front yard along each street line," so the four-foot front-yard cap runs along both street frontages.
- Corner lots: the sight triangle (§ 101-15D)."Within any sight triangle, no grade, vegetation, sign or other object shall be allowed to exceed a height of 30 inches above the adjacent roadway," inside the triangle formed by the street lines and a line drawn between points 25 feet from their intersection.
- Corner lots: the Chapter 82 rule (§§ 82-1–82-2). No fence or other structure over 2½ feet above curb level may stand "within 10 feet of any roadway and within 25 feet of the intersection of two roadways," and hedges in the same zone are kept cut to 2½ feet. Section 101-21E(4) makes both sight rules binding on every fence in every zone.
- Fences may stand in a required yard (§ 101-16B(5))."Fences and walls may project into any required yard, subject to § 101-21E" — the height and sight rules, not the yard setbacks, are what limit a fence.
- Tennis courts (§ 101-21E(5)). Perimeter fences around tennis courts are exempt from the caps above: up to 12 feet, at least 15 feet from side and rear property lines, and never in a required front yard.
- Pools (§ 101-21D; Ch. 88). A pool's inner face sits at least 20 feet from all property lines, inside a fence at least four feet high — see Pools below.
Town reference: Borough of Park Ridge Code, Ch. 101, § 101-21E (fences and walls); corner lots and sight triangle at § 101-15C–D; sight distance at Ch. 82, §§ 82-1–82-2; pools at Ch. 88, § 88-8 and § 101-21D; zoning fees at Ch. 101, Art. XII; construction fees at Ch. 50, § 50-2.
Fencing Park Ridge Properties
Park Ridge design starts with the lot's street frontage. Most of the yard — side and rear — takes a fence up to six feet (§ 101-21E(1)), which is where the standard solid privacy install lives. The front yard is a separate zone with its own four-foot cap, and on a corner lot there are two front yards, one along each street (§ 101-15C), plus two sight rules at the corner itself: nothing over 30 inches inside the 25-foot sight triangle (§ 101-15D), and nothing over 2½ feet within 10 feet of a roadway and 25 feet of the intersection (Ch. 82) — which usually keeps the corner itself open or unfenced. Every fence is installed finished side toward the adjoining properties (§ 101-21E(6)). Pool properties add the borough's deep setbacks: the pool's inner face at least 20 feet from every property line, paved surfaces at 15 feet with a landscaped buffer inside that band, and no part of the pool closer to the street than the rear wall of the house (§ 101-21D). During a free estimate we walk the lot, mark the front-yard line and the corner sight zones if there is one, lay out the pool setbacks if a pool is involved, and map each run against § 101-21E before we talk about styles. Anything not settled above is confirmed per property at permit time.
Fence Styles for Park Ridge Homes
White Vinyl Privacy Fencing
White vinyl privacy fencing is Park Ridge's standard backyard fence. The borough allows six feet in a residential zone outside the front yard (§ 101-21E(1)), so the full-height solid privacy panel — including our Victorian picket-top style — installs at its normal height along side and rear lines. Front-yard runs follow the borough's four-foot front-yard limit, and every fence goes in with its finished side facing the adjoining properties (§ 101-21E(6)).
Black Aluminum Fencing
Black aluminum fencing does two jobs in Park Ridge: an open four-foot front-yard fence under the front-yard cap (§ 101-21E(1)), and the pool barrier. Chapter 88 requires every permanent-type pool to be "completely surrounded by a fence or wall not less than four feet in height," built "so constructed as not to have open holes or gaps, if any, larger than four inches in diameter," with gates "equipped with a self-closing and self-latching device" and locked when the pool is not in use or not supervised by an adult (§ 88-8). The chapter sets no opening cap tighter than four inches and no latch height of its own. Our standard pool panel is 54 inches with pickets spaced 3.75 inches apart — above the chapter's four-foot floor, inside its four-inch gap limit, and under the six-foot residential fence cap — and compliance is judged on the complete installed barrier: height, openings, gates and latching hardware together, never on the panel alone.
Chain Link Fencing
Chain link follows the same Park Ridge map as every fence — six feet in side and rear yards, four feet in the front yard (§ 101-21E(1)) — and the same corner discipline: no chain link over 30 inches inside the sight triangle (§ 101-15D) and none over 2½ feet within 10 feet of a roadway and 25 feet of an intersection (Ch. 82). Its tall case in the borough is the tennis court, where a perimeter fence may reach 12 feet, set at least 15 feet off the side and rear lines (§ 101-21E(5)). We price chain link work after reviewing your footage, gates and terrain.
WPC Composite Fencing
WPC composite fencing in black, teak, gray, and black with teak accents installs at up to six feet on side and rear runs in Park Ridge, and at the four-foot cap in the front yard (§ 101-21E(1)). WPC gives you the look of wood in a panel that never needs staining, on aluminum posts.
Wood Fencing
Wood — solid stockade and board-on-board for privacy runs at the six-foot side and rear limit, open picket and split-rail toward the street at the four-foot front-yard limit (§ 101-21E(1)) — installed finished side toward the adjoining properties (§ 101-21E(6)), with corner runs held to both sight rules (§ 101-15D; Ch. 82).
Fence Installation Prices in Park Ridge
Current installation specials start at $23 per linear foot for six-foot white vinyl privacy fencing and $28 per linear foot for 54-inch black aluminum pool-barrier fencing. Minimum project is 150 ft, and both offers apply within our service area. Gates and removal of an existing fence are not included — they are priced separately(gates from $500 for a single gate and from $1,000 for a double gate). The six-foot vinyl price fits Park Ridge's six-foot residential allowance outside the front yard (§ 101-21E(1)); front-yard runs are built to the borough's four-foot limit and priced as part of the same project. The 54-inch aluminum pool fence clears Chapter 88's four-foot pool-fence floor (Ch. 88, § 88-8A) and is built as a complete Uniform Construction Code barrier, with gate hardware priced separately. Permit fees are the homeowner's (see Fence Permits below).
See our fence installation deals for current terms.
Fence Permits in Park Ridge
Park Ridge prices the fence at the zoning counter: the codified zoning fee is $50 for "decks, patios, fences, sheds, cabanas, aboveground pools, retaining walls, driveways, walks and entrance platforms" and anything else needing zoning approval before a construction permit (Ch. 101, Art. XII). An in-ground pool carries a $150 zoning fee under the same schedule. A pool itself needs a permit under Chapter 88 (§ 88-3), and its construction permit fees are calculated under the borough's Uniform Construction Code fee schedule (§ 88-17A, referring to § 50-2C), with plan review at 20% of the construction permit fee (§ 50-2B) — the borough calculates the total from the project rather than charging a flat pool fee. Solanos Fence submits the application with our state registration in your packet — our New Jersey Home Improvement Contractor registration is #13VH06388200.
Pool Fences in Park Ridge
Park Ridge's pool chapter (Chapter 88) states the enclosure rule in one sentence: " All permanent-type swimming pools now existing or hereafter constructed, installed, established or maintained shall be completely surrounded by a fence or wall not less than four feet in height, which shall be so constructed as not to have open holes or gaps, if any, larger than four inches in diameter" (§ 88-8A). Gates follow the same gap limit and "[e]ach gate or door shall be equipped with a self-closing and self-latching device for keeping the gate or door securely closed at all times when not in actual use," and "[a]ll gates and doors shall be locked when the pool is not in use or is not under the supervision of an adult" (§ 88-8B). The chapter sets no height cap and no latch height of its own — the fence also respects the zoning chapter's six-foot residential cap (§ 101-21E(1)). Placement is the borough's strictest fence-adjacent rule: a pool may not sit "within 20 feet of a property line nor closer to a street line than the rear wall of the dwelling" (§ 101-21D(1)), the pool's inner face stays at least 20 feet from all property lines with paved surfaces at least 15 feet out and a landscaped buffer inside that band (§ 101-21D(3)), and the pool itself stands no closer to any building than its maximum water depth in feet (§ 88-6B). Solanos Fence builds inside all of it: our standard pool panel is 54 inches — above the chapter's four-foot floor — with pickets spaced 3.75 inches apart, a self-closing, self-latching gate, and gate hardware priced separately.
Fence Materials for Park Ridge DIY Projects
Installing it yourself? Our Fairfield shop stocks white vinyl panels and posts, black aluminum panels and posts, and WPC packages. The paperwork comes first either way — the borough's zoning fee for a fence is $50(Ch. 101, Art. XII). Two cautions before you buy: the six-foot height stops at the front yard, where the cap is four feet(§ 101-21E(1)) — and a corner lot has a front yard along each street (§ 101-15C) — and at the corner itself nothing over 30 inches stands inside the sight triangle (§ 101-15D), with no fence over 2½ feet within 10 feet of a roadway and 25 feet of the intersection (Ch. 82). Every fence is installed with its finished side facing the adjoining properties (§ 101-21E(6)). Call ahead to confirm stock and pickup.
Browse fence materials for sale.
Frequently Asked Questions About Fences in Park Ridge
How tall can a fence be in Park Ridge?
Six feet in a residential zone — except the front yard, where "no fence exceeding four feet in height shall be permitted" (§ 101-21E(1)). Nonresidential fences cap at eight feet (§ 101-21E(2)), and a tennis-court perimeter fence may reach 12 feet under its own exception (§ 101-21E(5)). Every fence is installed with its finished side facing the adjoining properties (§ 101-21E(6)).
Can I put a six-foot privacy fence in my Park Ridge backyard?
Yes — side and rear yards are outside the front yard, so six-foot solid vinyl privacy fencing is a standard Park Ridge install under § 101-21E(1), finished side facing your neighbors. Only runs in the front yard are limited, to four feet.
Can I put a fence in my front yard?
Yes — up to four feet(§ 101-21E(1)). On a corner lot, both street frontages count as front yards (§ 101-15C), and two sight rules bind at the corner: nothing over 30 inches inside the sight triangle drawn 25 feet from the intersection (§ 101-15D), and no fence over 2½ feet within 10 feet of a roadway and 25 feet of the intersection (Ch. 82, § 82-2).
Do I need a permit for a fence in Park Ridge?
Yes — zoning approval, and the codified zoning fee for a fence is $50, paid when the application is submitted (Ch. 101, Art. XII). A pool project adds its own zoning fee — $50 for an aboveground pool, $150 for an in-ground pool — plus construction permit fees calculated under the borough's UCC schedule (Ch. 88, § 88-17A; Ch. 50, § 50-2). Solanos Fence submits the application with our state registration in your packet.
What are Park Ridge's pool fence rules?
Every permanent-type pool must be "completely surrounded by a fence or wall not less than four feet in height," with no open holes or gaps larger than four inches in diameter, and gates must be self-closing and self-latching and locked when the pool is not in use or not supervised by an adult (Ch. 88, § 88-8). The chapter sets no latch height and no height cap, and the zoning chapter's six-foot fence cap still applies. The pool itself sits at least 20 feet from every property line (§ 101-21D). Our standard pool panel is 54 inches with 3.75-inch picket spacing, and gate hardware is priced separately.
Can I install a chain link fence at my Park Ridge home?
Yes — chain link follows the standard § 101-21E(1) limits: six feet in side and rear yards, four feet in the front yard, and it is held to the corner sight rules like every other fence (§ 101-15D; Ch. 82). We price chain link work after reviewing your footage, gates and terrain.
Do you offer payment plans?
No, we don't offer payment plans.
Request a Free Fence Estimate in Park Ridge, NJ
Call or text 973-220-7638 for a free estimate. Tell us your approximate footage, the style you're considering, whether your lot is a corner lot, and whether a pool is involved — we'll plan the next steps around your property and Park Ridge's rules. Park Ridge is part of our Bergen County service area, and you can see everywhere we work there.
Solanos Fence| 1275 Bloomfield Ave, Building 3 Suite 51, Fairfield, NJ 07004 | 973-220-7638 | NJ Home Improvement Contractor Registration #13VH06388200
