Fence Installation in Denville, NJ

Denville is an openness town, not a height town. Its fence rule, § 600-166, allows fences up to six feet in side and rear yards — but only if they are not more than 10% solid. A fence more than 10% solid — which means every solid privacy fence — is permitted only in a rear yard, up to six feet (§ 600-166A). And Denville's pool chapter goes its own way too: a pool enclosure fence must be at least five feet high (§ 507-4E), taller than the standard pool panel. Both rules shape how we plan a Denville job before a single post is dug.

Solanos Fence installs vinyl, aluminum, WPC composite, wood and chain link fencing in Denville, NJ, and handles fence repair as well. We also sell fence materials for pickup at our Fairfield location. Denville is part of our Morris County service area.

Denville's Fence Rules: § 600-166 and § 507-4

Denville regulates fences at § 600-166 of its Land Use chapter and private pools at Chapter 507. The main rules:

  • The 10% rule (§ 600-166A)."Walls and fences are permitted in the required yards of all zones, provided they are not higher than four feet. In all residential zones, fences not higher than six feet are permitted in the side and rear yards, provided they are not more than 10% solid. Fences more than 10% solid are permitted only in the rear yards of residential zones, provided they do not exceed six feet in height."
  • What that means in practice. A solid six-foot privacy fence is a rear-yard fence in Denville. Along a side lot line, a six-foot fence must measure no more than 10% solid — an unusually strict test that standard picket panels do not pass (a typical aluminum picket panel works out to roughly 14% solid, and spaced wood pickets run higher). Whether a specific side-yard design meets the 10% test turns on its measured openness, which we confirm with the zoning office before quoting; a solid side-yard run needs a variance from the Board of Adjustment, which hears opacity variances regularly.
  • Front yards (§ 600-166A). Four feet maximum in a required yard. The codified text of § 600-166A states the height cap; how the 10%-solid test is applied to a front-yard design is confirmed with the zoning office for your property.
  • Corner lots (§ 600-165). On any corner lot in a residential district, no fence, structure or planting over 30 inches above the roadway may be erected or maintained within 20 feet of the curbline(or, where there is no curbline, 20 feet from the nearest side line of the road), so as to interfere with traffic visibility across the corner.
  • Business and industrial (§ 600-166B). Fences up to seven feet in side and rear yard areas only.
  • Finished side out (§ 600-166C). Any fence facing a public street or property line must have its front (finished) surface exposed to that street or property line.
  • No material bans. The located code text bans neither vinyl nor chain link; the limits are height and opacity, not material.
  • Deer fences. No special deer-fence provision — a deer fence is an ordinary fence under § 600-166 (six-foot cap, opacity rules), and taller deer fences have required height variances.
  • Pools (§ 507-4E). Every private pool is enclosed by a fence not less than five feet high, with no openings, mesh, holes or gaps larger than four inches and picket spacing no more than four inches; gates are self-closing and locking and stay locked when the pool is not in use. Pools also follow the Uniform Construction Code and the International Swimming Pool and Spa Code (§ 507-4B, H), the pool design is approved by the Township Health Officer (§ 507-4B), and no pool may sit in a front yard (§ 507-4C).

Town reference: Township of Denville Code, § 600-166 and Ch. 507, § 507-4; fees per the township fee schedule.

Fencing Denville Properties

A Denville fence plan starts with a yard-by-yard opacity check. The rear yard takes the six-foot solid privacy fence (§ 600-166A). The side yards take a six-foot fence only in a design that measures no more than 10% solid — a test standard picket panels fail — so a side-yard run is either a measured, zoning-confirmed open design, a lower fence, or a solid run with a variance. The front yard is four feet (§ 600-166A), and corner lots keep the § 600-165 visibility strip clear: nothing over 30 inches within 20 feet of the curbline. Pool enclosures are their own spec: at least five feet high under § 507-4E, which is taller than the standard 54-inch pool panel, so we measure and specify the barrier for your pool rather than pricing it off the standard panel — and because the township applies § 600-166's opacity rule to pool fences too, the barrier's yard placement and zoning approval are part of the same conversation. Lake-community properties — Indian Lake, Cedar Lake, Rock Ridge and the other lake neighborhoods — may also carry association rules on top of the township's; we check both before ordering materials. During a free estimate we walk the lot, map which yards take which fence, and confirm the layout before materials are ordered. Anything not settled above is confirmed per property at permit time.

Fence Styles for Denville Homes

White Vinyl Privacy Fencing

White vinyl privacy fencing is 100% solid, so in Denville it is a rear-yard fence: six feet along the rear line (§ 600-166A), including our Victorian picket-top style. A solid run along a side line exceeds the 10%-solid cap and needs a Board of Adjustment variance — we will tell you at the estimate whether your layout needs one, or whether an open side-yard style gets you the same coverage without the hearing.

Black Aluminum Fencing

Black aluminum fencing is Denville's front-yard style at four feet (§ 600-166A) and a common pool and side-yard fence — with one honest caution: at six feet in a side yard, a fence must measure no more than 10% solid, and a standard aluminum picket panel works out to roughly 14% solid, so it does not pass that test on its own numbers. Side-yard aluminum at six feet is a design we confirm with the zoning office (or pair with a variance) before quoting. For pools, Denville requires the enclosure to stand at least five feet(§ 507-4E), so a Denville pool barrier is a taller aluminum install than the standard 54-inch panel; we quote pool enclosures by free estimate (see Pool Fences below).

Chain Link Fencing

Chain link follows Denville's height map — four feet in a required yard, up to six feet in side and rear yards (§ 600-166A), finished side out (§ 600-166C) — and no local rule located bans it. In a side yard, the six-foot run still has to meet the 10%-solid test, and chain link's measured openness depends on its mesh and wire gauge, so we confirm the specific product with the zoning office before quoting a side-yard install. We price chain link work after reviewing your footage, gates and terrain.

WPC Composite Fencing

WPC composite fencing in black, teak, gray, and black with teak accents is a solid panel, so it follows the same map as vinyl privacy: six feet in the rear yard(§ 600-166A), on aluminum posts, with open styles along the side lines. WPC gives you the look of wood in a panel that never needs staining.

Wood Fencing

Wood splits by yard in Denville: solid stockade and board-on-board are rear-yard fences at six feet, while picket and post-and-rail run four feet in front (§ 600-166A) — all with the finished side facing the adjoining property or the street (§ 600-166C). A six-foot side-yard wood fence faces the same measured 10%-solid test as every other style; spaced-picket designs are checked against it with the zoning office before we quote.

Fence Installation Prices in Denville

Current installation special: $23 per linear foot for six-foot white vinyl privacy fencing. Minimum project is 150 ft, and the offer applies within our service area. Gates and removal of an existing fence are not included — they are priced separately(gates from $500 for a single gate and from $1,000 for a double gate). In Denville the six-foot vinyl price fits the rear yard, where solid fences are permitted up to six feet (§ 600-166A). The special is for the six-foot vinyl privacy fence itself: side-yard sections — which must meet the 10%-solid test, use a different design, or go through a variance — are reviewed and priced separately as part of the project quote, and are not promised at the privacy-fence rate. Pool enclosures in Denville are quoted by free estimate: the township requires a pool fence at least five feet high (§ 507-4E) — taller than our standard 54-inch pool panel — so a Denville pool barrier is measured and specified for your pool rather than priced off the standard panel. Permit fees are the homeowner's (see Fence Permits below).

See our fence installation deals for current terms.

Fence Permits in Denville

A Denville fence starts with a zoning permit — the township fee schedule sets the fence zoning permit at $75. The township's application asks for the fence's height and a photo of the fence being installed, with two scalable copies of a survey showing the layout. That paperwork is where the § 600-166 map gets checked: rear-yard solid, side-yard open, front yard four feet. A solid side-yard run needs a variance from the Board of Adjustment before it can be permitted. Pool enclosures also go through a construction permit for the barrier. Solanos Fence submits the application with our state registration in your packet — our New Jersey Home Improvement Contractor registration is #13VH06388200.

Pool Fences in Denville

Denville writes its pool barrier spec at § 507-4E: every private swimming pool "shall be enclosed by a fence of the following type: (1) Height: a fence not less than five feet high above the grade of the yard or lot upon which the pool is located. (2) Construction: of a type and so constructed that there shall be no openings, mesh, holes or gaps larger than four inches in any part of the fence, except that where picket fences are used, the horizontal distance between the pickets shall not exceed four inches. (3) Gates: Gates which are part of the enclosing fence shall be of the same specifications as the fence and shall be equipped with a self-closing device and a locking device. All gates shall be kept locked when the pool is not in use." The five-foot floor is the point that matters most: our standard pool panel is 54 inches, so Solanos Fence quotes Denville pool enclosures by free estimate — we measure the pool, spec a barrier at five feet or better that also fits § 600-166's opacity map for your yards, and price that enclosure, with gate hardware priced separately. The enclosure's placement also needs zoning approval under § 600-166, like any other Denville fence. The pool itself may not sit in a front yard (§ 507-4C), and its design is approved by the Township Health Officer under the Uniform Construction Code (§ 507-4B).

Fence Materials for Denville DIY Projects

Installing it yourself? Our Fairfield shop stocks white vinyl panels and posts, black aluminum panels and posts, and WPC packages. The paperwork comes first either way — the zoning permit($75) with the fence's height and a photo of the fence, plus your survey. Two cautions before you buy: a solid fence over 10% solid belongs in the rear yard only(§ 600-166A), whatever its height — and if the project is a pool enclosure, the barrier must stand at least five feet(§ 507-4E), so measure for a taller panel than the standard pool size. Call ahead to confirm stock and pickup.

Browse fence materials for sale.

Frequently Asked Questions About Fences in Denville

How tall can a fence be in Denville?

Six feet in side and rear yards — but only if the fence is not more than 10% solid; a fence more than 10% solid is permitted only in a rear yard, up to six feet (§ 600-166A). In a front yard the cap is four feet. Business and industrial fences reach seven feet in side and rear yards (§ 600-166B).

Can I put a six-foot privacy fence in my Denville backyard?

Yes, along the rear lot line — solid six-foot privacy fencing is permitted in rear yards (§ 600-166A). Along a side line, six feet requires a design measured at no more than 10% solid — a test standard picket panels do not pass — or a variance from the Board of Adjustment.

Do I need a permit for a fence in Denville?

Yes — a zoning permit; the township fee schedule sets the fence permit at $75, and the application requires the fence's height, a photo of the fence, and survey copies. Pool enclosures also take a construction permit. Solanos Fence submits the application with our state registration in your packet.

What are Denville's pool fence rules?

The enclosure fence must be at least five feet high, with no openings or picket gaps larger than four inches, and gates that self-close and lock, kept locked when the pool is not in use (§ 507-4E). Because five feet is taller than the standard 54-inch pool panel, we quote Denville pool enclosures by free estimate.

Can I install a chain link fence at my Denville home?

Yes, subject to the same map as every Denville fence: four feet in a required yard, six feet in the rear yard, and in a side yard only if the specific mesh and gauge measure no more than 10% solid (§ 600-166A) — which we confirm with the zoning office before quoting. Finished side out (§ 600-166C). We price chain link work after reviewing your footage, gates and terrain.

Do you offer payment plans?

No, we don't offer payment plans.

Request a Free Fence Estimate in Denville, NJ

Call or text 973-220-7638 for a free estimate. Tell us your approximate footage, the style you're considering, which yards the fence will run in, and whether a pool is involved — we'll plan the next steps around your property and Denville's rules. Denville is part of our Morris County service area, and you can see everywhere we work there.

Solanos Fence| 1275 Bloomfield Ave, Building 3 Suite 51, Fairfield, NJ 07004 | 973-220-7638 | NJ Home Improvement Contractor Registration #13VH06388200