Fence Installation in Bernardsville, NJ

Bernardsville writes its fence heights by zone, and that is the first thing to know before planning a fence there. In the R-3, R-4 and R-5 districts, the borough's fencing section — § LD-12-23.26 — caps a fence outside the front yard at six feet and a front-yard fence at four feet, with front-yard fences open enough that they do not obstruct more than 50% of the view. The borough's other residential district rules — R-1, R-1A, R-2 and R-1-10 — as written set no fence height cap; that is what those district rules say, and the height for a specific property is confirmed with the borough at permit time. One rule sits outside the fence section entirely: a fence required by a legal requirement relating to a swimming pool is not covered by § LD-12-23.26  (§ LD-12-23.26b.1) — pool barriers follow the New Jersey Uniform Construction Code instead. And Bernardsville fences start with a permit: fences greater than two and one-half feet in height require the appropriate permit from the building officer  (§ LD-12-23.26e).

Solanos Fence installs vinyl, aluminum, wood and WPC fencing in Bernardsville, NJ, and handles fence repair as well. We also sell fence materials for pickup at our Fairfield location. Bernardsville is part of our Somerset County service area.

Bernardsville's Fence Rules: § LD-12-23.26

Bernardsville's fence rules live in one section of its Land Development Ordinance — § LD-12-23.26, "Fencing; Perimeter of Fences and Walls" — covering perimeter fences of lots in residential districts, deer fencing included. The main rules:

  • Height, by zone (§ LD-12-23.26c). The codified caps are written for zones 3, 4 and 5 — the R-3, R-4 and R-5 districts: the maximum height of any fence other than in a front yard is six feet, and the maximum height of a fence in a front yard is four feet. A gateway post may be 10% taller than the fence it serves, and height is measured from the ground to the top of the fence on the side with the lowest grade. Read as written, the district rules for R-1, R-1A, R-2 and R-1-10 set no fence height cap — that states what those district rules say, not a guarantee of any particular height; the height for a specific property is confirmed with the borough at permit time, and the fence section's general requirements below still apply in those districts.
  • Front-yard openness (§ LD-12-23.26f.7). A fence in a front yard may not obstruct more than 50% of the view through it — front yards take open styles, not solid privacy panels.
  • Materials (§ LD-12-23.26d). No fence may be constructed using barb wire, razor wire, accordion wire or other materials having sharp edges or points, or such other materials as are dangerous to animals or humans, and electrified wire is prohibited. One further ban applies to front-yard fences only: welded wire, steel chain link, rebar, concrete block, concrete, masonry lime or flue tile, or mesh or lathe made of any material may not be used in a front-yard fence. The section does not ban chain link or mesh in side and rear yards (see Chain Link Fencing below). Vinyl, WPC, aluminum and wood are not on the prohibited list.
  • Placement (§ LD-12-23.26f.1, f.2, f.5). A fence must be constructed within the property lines of the lot and may not encroach on a public road or right-of-way — the Zoning Officer may permit a fence in the unpaved portion of the right-of-way under Borough Code § 14-1.8 if it is not a safety hazard. A fence bordering a street must be built at least 10 feet from the edge of the street pavement, or 2 feet from the inner edge of the sidewalk where there is one; the Zoning Officer may permit closer placement under § 14-1.8 on the same safety condition. On corner lots, nothing over 30 inches may stand within 20 feet of the corner property line, and no fence may be erected within the sight triangle area established at § LD-12-23.5.
  • Finished side (§ LD-12-23.26f.4). Fences are built so the finished side faces outward, away from the center of the lot — the good side faces the neighbors and the street.
  • Drainage (§ LD-12-23.26f.6). A fence may not be erected in a manner that dams or diverts water or otherwise interferes with drainage on the property or on abutting properties.
  • Permits (§ LD-12-23.26e)." Fences greater than 2.5 feet in height shall require the appropriate permit from the building officer." Two fees apply — see Fence Permits below.
  • Pools (§ LD-12-23.26b.1). Fences required by any legal requirement relating to swimming pools are not covered by § LD-12-23.26 at all — see Pool Fences below.

Borough reference: Bernardsville Land Development Ordinance § LD-12-23.26 (Fencing; Perimeter of Fences and Walls): scope and exemptions ¶ a–b; heights ¶ c; materials ¶ d; permits ¶ e; general requirements ¶ f. Sight triangles § LD-12-23.5. Zoning permit fee § LD-12-3A(d); construction fees, Borough Code Ch. 12, § 12-1.2a(6).

Fencing Bernardsville Properties

A Bernardsville layout starts with the zone. In the R-3, R-4 and R-5 districts the map is set by § LD-12-23.26c: six feet of privacy behind the front yard, four feet and at least half-open in front of it. In the R-1, R-1A, R-2 and R-1-10 districts the district rules as written set no fence height cap, so we confirm the property's height position with the borough at permit time before materials are ordered — either way, the general requirements apply everywhere: fences built within the property lines, at least 10 feet back from the edge of the street pavement (or 2 feet from the inner edge of the sidewalk) where a fence borders a street, finished side out, the corner-lot and sight-triangle limits near the street, and no damming or diverting of water on a borough where many lots slope. The section also covers deer fencing, a common Bernardsville request on larger wooded lots; its placement on a given property is confirmed at permit time. Pool projects leave the fence section behind entirely and follow the state construction code under § LD-12-23.26b.1. During a free estimate we walk the lot, mark the lines, and confirm the layout before materials are ordered. Anything not settled above is confirmed per property at permit time.

Fence Styles for Bernardsville Homes

White Vinyl Privacy Fencing

White vinyl privacy fencing — solid full-privacy panels — is the style the $23-per-foot special covers, and full privacy is that style; we also install a Victorian picket-top style, priced separately. In the R-3, R-4 and R-5 districts, the six-foot privacy run is the codified fit for the side and rear yards  (§ LD-12-23.26c), while the front yard stays at four feet and at least 50% open (§ LD-12-23.26f.7). In the R-1, R-1A, R-2 and R-1-10 districts, where the district rules as written set no fence height cap, we confirm the six-foot layout for your property with the borough at permit time.

Black Aluminum Fencing

Black aluminum fencing is an open picket design, at home in the four-foot, half-open front yard the R-3, R-4 and R-5 rules describe, and it runs to six feet outside the front yard. For pools, § LD-12-23.26b.1 takes pool fences out of the borough fence section altogether: the barrier follows the state construction code standard — at least 48 inches high, openings inside four inches, with self-closing and self-latching gates. Our 54-inch pool-code aluminum panel is built to that spec, with picket spacing of 3.75 inches, and the completed barrier is confirmed against the standard at permit time.

Chain Link Fencing

Bernardsville's materials rule is a front-yard rule: § LD-12-23.26d prohibits steel chain link — along with welded wire, rebar, and mesh or lathe of any material — in front-yard fences. The borough fence section does not ban chain link in side and rear yards. Placement and your property's zone rules are confirmed at permit time — ask for a free estimate and we will confirm the options for your property before anything is quoted. We price chain link work after reviewing your footage, gates and terrain.

WPC Composite Fencing

WPC composite fencing in black, teak, gray, and black with teak accents is a fully solid style, set on 3x3 aluminum posts — planned at six feet outside the front yard in the R-3, R-4 and R-5 districts, and confirmed per property at permit time in the districts whose rules set no height cap. WPC gives you the look of wood in a panel that never needs staining.

Wood Fencing

Wood privacy and stockade styles follow the same zone map: six feet outside the front yard where § LD-12-23.26c's cap applies, open wood designs — picket and rail styles — for the four-foot, half-open front yard. The finished side faces outward (§ LD-12-23.26f.4).

Fence Installation Prices in Bernardsville

Current installation specials start at $23 per linear foot for six-foot white vinyl full privacy fencing and $28 per linear foot for 54-inch black aluminum pool-barrier fencing. Minimum project is 150 ft, and both offers apply within our service area. Gates and removal of an existing fence are not included — they are priced separately  (gates from $500 for a single gate and from $1,000 for a double gate). The six-foot vinyl price fits the codified six-foot allowance outside the front yard in the R-3, R-4 and R-5 districts (§ LD-12-23.26c); in the R-1, R-1A, R-2 and R-1-10 districts, whose district rules as written set no fence height cap, the layout is confirmed for your property with the borough at permit time. The pool price fits the state construction code standard that governs Bernardsville pool fences under § LD-12-23.26b.1: our 54-inch panel is built to the standard for height, openings and gates, with the completed barrier confirmed at permit. Permit fees are the homeowner's (see Fence Permits below).

See our fence installation deals for current terms.

Fence Permits in Bernardsville

Bernardsville's permit rule is § LD-12-23.26e: " Fences greater than 2.5 feet in height shall require the appropriate permit from the building officer." Two codified fees stack. The zoning permit fee is $100 — § LD-12-3A(d): "The fee for all Zoning Permit applications shall be $100." The construction permit fee for a fence is $45 under the borough's construction code fee schedule (Borough Code § 12-1.2a(6)) — $145 in borough fees for a standard fence project. Solanos Fence submits the application with our state registration in your packet — our New Jersey Home Improvement Contractor registration is #13VH06388200.

Pool Fences in Bernardsville

Bernardsville's pool rule is an exemption: § LD-12-23.26b.1 lists fences "required by any legal requirement relating to swimming pools" among the fence types not covered by the borough's fencing section. The barrier is therefore governed by the legal requirement that requires it — the New Jersey Uniform Construction Code — and the borough sets no local height, opening or picket cap of its own. The barrier is built to the state construction code standard: at least 48 inches high, no opening passing a four-inch sphere, with self-closing, self-latching gates — and where the barrier's rails are at least 45 inches apart, picket spacing may run to four inches. Our 54-inch pool-code aluminum panel is built for that standard — 54 inches high, with pickets spaced 3.75 inches apart and rails 45 inches apart between the bottom and middle rail — with the completed barrier confirmed at permit and inspection.

Fence Materials for Bernardsville DIY Projects

Installing it yourself? Our Fairfield shop stocks white vinyl panels and posts, black aluminum panels and posts, and WPC packages. The paperwork: fences greater than two and one-half feet in height require the appropriate permit from the building officer  (§ LD-12-23.26e) — with borough fees of $100 for the zoning permit and $45 for the construction permit. Three cautions before you buy: in the R-3, R-4 and R-5 districts the codified caps are six feet outside the front yard and four feet in it, and the R-1, R-1A, R-2 and R-1-10 district rules as written set no fence height cap, so confirm your property's position with the borough first (§ LD-12-23.26c); barb wire, razor wire, accordion wire and other sharp-edged or dangerous materials, and electrified wire, are prohibited, and steel chain link and other mesh are prohibited in front-yard fences  (§ LD-12-23.26d); and a fence is built within the property lines — at least 10 feet from the edge of the street pavement, or 2 feet from the inner edge of the sidewalk, where it borders a street — with the finished side out (§ LD-12-23.26f). If the project is a pool enclosure, the borough fence section does not cover it — the barrier follows the state construction code standard: 48 inches minimum, openings inside four inches, self-closing and self-latching gates. Call ahead to confirm stock and pickup.

Browse fence materials for sale.

Frequently Asked Questions About Fences in Bernardsville

How tall can a fence be in Bernardsville?

It depends on the zone. In the R-3, R-4 and R-5 districts, § LD-12-23.26c caps a fence at six feet outside the front yard and four feet in a front yard, measured from the ground on the lowest-grade side. Read as written, the R-1, R-1A, R-2 and R-1-10 district rules set no fence height cap — that is what those district rules say, and the height for a specific property in those districts is confirmed with the borough at permit time. Fences greater than two and one-half feet require a permit.

Can I put a six-foot privacy fence in my Bernardsville backyard?

In the R-3, R-4 and R-5 districts, yes — six feet outside the front yard is the codified allowance (§ LD-12-23.26c), and a solid vinyl privacy fence is the standard install there. In the R-1, R-1A, R-2 and R-1-10 districts, the district rules as written set no fence height cap; we confirm the layout for your property with the borough at permit time before materials are ordered.

Do I need a permit for a fence in Bernardsville?

Yes, for most fences. Section LD-12-23.26e provides: " Fences greater than 2.5 feet in height shall require the appropriate permit from the building officer." Two borough fees apply: a $100 zoning permit  (§ LD-12-3A(d)) and a $45 construction permit fee for fences (Borough Code § 12-1.2a(6)) — $145 in total. Solanos Fence submits the application with our state registration in your packet.

What are Bernardsville's pool fence rules?

The borough's fencing section does not cover pool fences: § LD-12-23.26b.1 exempts fences required by any legal requirement relating to swimming pools, so the barrier follows the New Jersey Uniform Construction Code — at least 48 inches high, openings inside four inches, self-closing and self-latching gates, with no local cap added by the borough. Our 54-inch pool-code aluminum panel — pickets at 3.75 inches, rails 45 inches apart — is built to that standard, with the completed barrier confirmed at permit time.

Can I install a chain link fence at my Bernardsville home?

In side and rear yards, yes — the borough fence section does not ban chain link there. In a front yard, no: § LD-12-23.26d prohibits steel chain link  (and welded wire, rebar, and mesh or lathe of any material) in front-yard fences. Placement and your property's zone rules are confirmed at permit time — ask for a free estimate and we will confirm the options for your lot before anything is quoted.

How close to the property line can my fence stand?

A fence must be built within the property lines of the lot, and it may not encroach on a public road or right-of-way — the Zoning Officer may permit a fence in the unpaved portion of the right-of-way under Borough Code § 14-1.8 if it is not a safety hazard (§ LD-12-23.26f.1). Where a fence borders a street, it must be built at least 10 feet from the edge of the street pavement, or 2 feet from the inner edge of the sidewalk where there is one, unless the Zoning Officer permits closer placement under § 14-1.8 (§ LD-12-23.26f.2). Two more street-side limits apply: on corner lots, nothing over 30 inches may stand within 20 feet of the corner property line  (§ LD-12-23.26f.5), and no fence may be erected within the sight triangle area (§ LD-12-23.5). Check applicable easements and permit conditions before locating the fence.

Do you offer payment plans?

No, we don't offer payment plans.

Request a Free Fence Estimate in Bernardsville, NJ

Call or text 973-220-7638 or contact Solanos Fence online . Tell us your approximate footage, the style you're considering, your zone if you know it, whether you are on a corner lot, and whether a pool is involved — we'll plan the next steps around your property and Bernardsville's rules. Bernardsville is part of our Somerset County service area, and you can see everywhere we work there.

Solanos Fence| 1275 Bloomfield Ave, Building 3 Suite 51, Fairfield, NJ 07004 | 973-220-7638 | NJ Home Improvement Contractor Registration #13VH06388200